PHARMACEUTICALS

Strip Packaging :

---

25/30/40-micron thick, soft foil either laminated to low density polyethylene or coated with heat seal lacquer (HSL) for sealing as per customer need.

---

FOIL MATERIAL :
Soft fully annealed aluminium alloy AA 8011 / AA 1200 conforming to Aluminium Association specification.

Std Foil Gauge Options	Tolerance ( +/-8% )	Min. Bursting Strength
0.025 mm	±0.002 mm	1.5 kg/sq. cm
0.030 mm	±0.0024 mm	1.9 kg/sq. cm
0.040 mm	±0.0032 mm	2.5 kg/sq. cm

---

SEALANT :
Colourless LDPE conforming to the applicable Government regulations regarding direct contact with medicines and drugs.

Standard Polymer Gauge ( Options )	Nominal (GSM)	Tolerances ( +/- 15% ) ( GSM )
150	34.39 g	± 5.16
180	41.27 g	± 6.19
200	45.85 g	± 6.88

Sample Images :

• 

• 

• 

---

Blister Packaging :

---

20/25/30-micron thick, hard foil coated with heat seal lacquer (HSL) of varied gsm as per need.

Standard Foil Gauge ( Options )	Tolerances ( +/- 8% )
0.020 mm	± 0.0016 mm
0.025 mm	± 0.002 mm
0.035 mm	± 0.0024 mm

---

HEAT SEAL COATING :
Colorless Vinyl Resin (option for tinted resin available) conforming to the applicable Government regulations regarding direct contact with medicines and drugs. The resin is suitable for heat sealing to PVC/PVDC coated PVC films.

---

COATING THICKNESS OPTIONS :
(a) 4-6 GSM with a tolerance of +/- 0.5 GSM
(b) 6-8 GSM with a tolerance of +/- 0.5 GSM Standard, if not specified, heat sealing coating GSM is 4 with a tolerance of +/- 0.5.

---

PRINTING AND LACQUER COATING :
Printed as per text, layout and shade approved by customer. For non-printed specification, clear lacquer to be coated as a protective coating and good printability. Printing inks and lacquer coatings are capable to withstand 180 deg. C for 1 sec. dwell time.

Sample Images :

• 

• 

• 

• 

---

Alu Alu Foil :

---

25-micron OPA Film /Adhesive /45-micron Aluminium foil / 60 micron PVC filmAluAlu Foil is an excellent multilayered structure Designed for the high sensitive range of Pharmaceutical and generic medicines which are highly hygroscopic or light sensitive and cannot be suitably packed with barrier plastic films. The structure is an optimized combination of aluminium foil and polymeric films with the alumina layer sandwiched between an inner heat sealable polymeric film and outer supportive malleable film.

Test Parameter	Unit	Specification Value	Tolerance Limit
Total Grammage	GSM	240 gsm	± 19 mm ( ± 8%)
Total Thickness	Micron	145 micron	± 12 mm ( ± 8%)
Width	mm	Customer Specified	± 0.5 mm
Coral ID	mm	76 mm	± 0.5 mm
Rell OD	mm	250 to 350 mm	± 5 mm
ECV / Cup Depth	mm	9 mm	min. value
Seal Strength with Blister Foil	grams/ 15 mm	500 grams / 15 mm	min. value

Sample Images :

• 

• 

• 

---

ORS Pouch :

---

7/9/12-micron thick, soft foil laminated with paper, films like polyester (PET), biaxially oriented polypropylene (BOPP), polyethylene (poly) and their combinations. Chiefly used for pouches and sachets. Offered in both surface and reverse printing.

Structure	PET GSM ( ± 5 %)	PET GSM ( ± 8 %)	LDPE GSM ( ± 5 %)
9 mic Foil / 37 mic LDPE	62.8	24.3	34.5
12 mic Foil / 37 mic LDPE	62.8	32.4	34.5
12 mic Foil / 50 mic LDPE	62.8	32.4	46
12 mic Foil / 62.5 mic LDPE	62.8	32.4	57.5

Sample Images :